Sunday, August 29, 2010

$75 CNC Mini Mill Parts Machined

We have some of our Mini Mill parts machined. We will need some time to get the larger pieces of material in to produce the frame side pieces but we will push forward. Stay tuned.

9 comments:

  1. This is design of milling machiene is very good.Hope I need to design my new wooden shutters.for new project.

    ReplyDelete
  2. Do you have any more information on this mill, size ect.?
    Thank, Larry

    ReplyDelete
  3. Sorry, there is no way to buy the items for only 75 dollars !

    ReplyDelete
    Replies
    1. In 2010, I was able to do it minus the stepper motors, router spindle and mount. I can probably still do it today. You have to know where to buy your materials as cheap as possible.

      Delete
  4. In 2010, I was able to do it minus the stepper motors, router spindle and mount. I can probably still do it today. You have to know where to buy your materials as cheap as possible.

    ReplyDelete
  5. What materials did you use to build the Mill?
    Thanks, Larry

    ReplyDelete
    Replies
    1. Hi Larry,

      I used HDPE for the man components like the side plates, top plates and end plates. The linear rods are hand polished cold rolled steel. If you go to your local plastic supply place they usually have some damaged pieces you can buy and fabricate your machine from them at a reduced cost.

      Delete
  6. SAI WELD INDIA Authorised Distributor of Thermal Dynamics Dealers & Importer of : Hypertherm, IGBT Inverter, Plasma / TIG / MIG / Arc Welding Machines Tungsten Electroddes and plasma cutters plasma consumable plasma torches etc.. for more vist our site www.plasmaconsumable.in

    ReplyDelete
  7. Great blog that highlights of CNC Cutting Machine

    Also look our for our new website: http://www.arcbro.com/
    ARCBRO CNC Cutting solutions is a specialist exporter of CNC Cutting Machine

    ReplyDelete